The fluffy epilogue that I wrote after Real/Cloth Nappy Week this year talked about my realisation that washable wipes were a very simple concept and that I could make some myself rather than buy the branded or even WAHM-made ones (WAHM = work at home mum). I do like to support WAHMs where possible, but in this case I’m being my very own WAHM and saving myself the cost of buying washable wipes even from them.
Although these took me very little time to make, the process taught me that I would actually find it very hard to be a WAHM myself at this stage when the boys are still so young, because I found I could only grab the odd five or ten minutes here and there between doing things with them, for them and around the flat. I don’t know how WAHMs do it! At least all the blogging I do is when I’m sitting down feeding or have a sleeping baby on me and can’t do other stuff anyway. And at least the wipes were simple enough that I could flit in and out of doing them easily.
The fabrics I used were all old items of baby stuff that we no longer use for various reasons. We had a baby towel that was free with one of the supermarket parenting clubs (I think) but it’s only for newborns and both our boys grew out of it in about a month. I also found a fleece throw that we hadn’t used much and some old clothes (in cotton jersey fabric) that were either very worn out or had stains on one bit of them but the rest was fine. So I’ve done a bit of ‘upcycling’ (as seems to be one of the latest buzz words) in making these wipes.
The first batch I made with half the towel had this towel fabric on one side and half fleece half jersey on the other. I made them fairly big at 13x20cm. Now that we’re using them I would say that we could get away with them being a bit smaller than this as they clean up poo so easily, so the next batch I make will be a bit smaller. I’d seen washable wipes online made in two different ways: (1) two pieces of fabric overlocked together, or (2) two pieces of fabric sewn right sides together then pulled through back on itself and top stitched around the outside to seal the hole left in order to pull it outside in. I experimented with both methods, and found that the second one worked better with these fabrics on my machine – I don’t have a proper overlocker so was just using that stitch on my sewing machine and cutting off the excess fabric, but it was hard to make a neat straight edge, and although it still functions as a wipe perfectly well, it doesn’t look as nice (or ‘professional’ in Tom’s words) as the outside-in-method ones.
Here’s a tutorial with photos showing how I made these wipes (using the second method described above)…..
1) Cut out the fabrics – for a 13x20cm wipe you’ll need to cut 15x22cm of towel, and then fleece and jersey to cover roughly half each of the area of the towel, plus 1cm overlap where the fleece and jersey are sewn together. Here the photo shows the fabrics folded up in sets of towel, fleece and jersey all cut and ready to pin.
2) Sew the fleece and jersey together down the one side that will be in the middle of the wipe – put right sides together and sew using a plain straight stitch along this one side, 1cm from the edge. When you’re done, open it out flat.
3) Place the jersey and fleece piece right side down on the towel. (In the picture – this was the corner of the towel so I trimmed the jersey fabric to fit the curve of the corner here). Pin at right angles to the edge of the fabric every few centimetres along all four edges.
4) Sew at 1cm from the edge all the way along three of the edges and about 2/3 of the way along the fourth edge to leave a hole where you can pull the fabric through from the outside inwards. Please excuse this photo – it DOES NOT show right sides together as it should – this was the one wipe that I overlocked instead and I must have taken a picture of this by mistake! Make sure when sewing the two pieces of fabric together that you can’t see the print of the jersey – if you’re just using towel and plain fleece, it wouldn’t matter anyway as there aren’t ‘right’ and ‘wrong’ sides.
5) Remove the pins and then pull the fabric through the hole to turn it outside in and reveal the pattern on the jersey. Fold the edges of fabric sticking out at the hole (as seen on the top left corner here) inwards, following the fold of the rest of the seam.
6) Top stitch (using a plain straight stitch on the machine) along the length of the hole and continuing along all four edges of the wipe, at about 2mm in from the edge, to give it a nice finish. Here the picture shows the finished wipe on the right, along with the overlocked one on the left for comparison.
Now to make some more, as well as some wet bags… whenever I find the time!