It’s that time of year again: my parents’ birthdays are here (one in February and one in March). They have lots of things and I never know what to buy them. So this year I decided to make them personalised cards for a present, because I know they will appreciate something that was hand made. (I also popped some cinema vouchers inside for Mum – I can’t say yet what will be in Dad’s as his birthday hasn’t come yet.) Here’s how I made the card called ‘Granny’s Garden’….
I started with a piece of A4 chocolate brown stiff card in a landscape orientation
I folded it into 3 in a zig-zag kind of way: the height of the folded card is the shorter side of A4, and each third is about 10cm wide. I cut off a piece from the top of the middle section and the front section using wavy pinking scissors to create a wavy edge, cutting from one side to the other in a diagonal direction.
I cut a piece of green paper with a geometric pattern about 5mm less wide on both sides than the front section of the brown card. I cut the top with wavy pinking scissors to create a wavy edge at the same angle as the card. I then made a plant bed (see next picture).
To make a plant bed just like Granny has (but hers aren't pink!), I cut a small rectangle of brown card for the soil, two longer strips of pink stripy paper, two shorter thinner strips and finally 4 very short and thin bits for the corner posts. It was all stuck together using double-sided tape, and likewise stuck onto the brown card. I added some small bits of thick green wool to be the vegetables, stuck on with PVA glue at the base only so they flap around at the top.
I then attached two cocktail sticks to the inside of the card, which would later be used to hold the bunting up. They were stuck on with PVA glue and then a small rectangle of brown card on top to cover up the stick where it was attached on the card.
This was the trickiest and fiddliest bit. I made some bunting using lilac craft wire and little triangles cut out of various patterned papers. I folded each triangle over the top of the wire by about 3mm, and stuck it down back on itself using double-sided tape. I used contrasting patterns and colours for each successive triangle as I went along. Finally I wrote 'Granny's Garden' on the finished bunting using a black gel pen.
I attached the bunting to the back of the card at the top using double sided tape and then sticking a small piece of brown card over the top using more DS-tape to hide the wire where it was stuck down. At the other end I tied the wire around the cocktail stick and put a small blob of PVA glue to stop it springing up again. The bottom piece of bunting was attached at both ends to a cocktail stick in the same way.
I then stuck a piece of coloured paper with a flowery pattern on the middle section of the card, about 5mm less wide on both sides than the card itself so there was a brown border. I also cut the top using waving pinking scissors to create a wavy edge. I stuck a button on with PVA glue on the centre of the big blue and green flower on the top right (see below)
I then cut out a wheelbarrow shape, a fork and a trowel in different coloured papers that contrasted with the green background. They were stuck on using DS-tape, and then I drew around the wheelbarrow with a black gel pen. A black button for its wheel, stuck on with PVA glue, completed the wheelbarrow.
Inside a Happy Birthday sticker completed the card, and it was then ready to write for Granny.
There we are: Granny's Garden
I love making things and this project reminded why I like doing it for other people – I like to see them receive something personalised and made with love. I find it very relaxing and it’s the kind of thing I do when Daddy and Andrew go out together on a Saturday morning. There will be more of this kind of craft coming up on the blog when I get the chance.
Follow me on social media